Cartridge Belts, RUSSET, 1 Ply, Leather shown in 2.25 in wide, Top Grain Leather, 30 Loops, USA

Cartridge Belts, RUSSET, 1 Ply, Leather shown in 2.25 in wide, Top Grain Leather,30 Loops, USA
=======================
CARTRIDGE BELT SIZING:

Please Pay Attention to this.

******We cannot process your order if you don't give us a size. ***********

To pick the size for the new cartridge belt, please remember that this belt will probably be worn over your trouser belt and some outdoor clothing.

So, we recommend that you select your Dress Belt size (the one you use for your trousers) as the tightest hole on the new Cartridge Belt. That way you can customize the range that you like.

FAVORITE BELT:
If you have a favorite dress belt, but forgot the belt size just lay the dress belt on a table and measure from the buckle end over to the most used and worn hole. What is that size?
Send it to us in the PERSONALIZATION SECTION when you order.
This size will become the tightest hole on your new Cartridge Belt with 8 more holes for heavy clothing.

Please see the PERSONALIZATION SECTION when checking out, to add Initials and cartridge belt size.

For the tightest hole selection of 38", you would have 9 holes ranging to 46".

This will allow you to pick the best belt size of your choice.

Your new belt will be sized to fit with plenty of extra holes (8), holes to the right of the tightest hole to allow for heavy clothing or Carharts or Waders.

LARGER SIZE 50+:
Please email a request for anything larger than the 50". $10 More. Please add using the "custom work" link below.
https://www.etsy.com/listing/531156167

=========================
SASS:
Custom SASS work available.
===================================
HOLSTERS:

If space for Holsters is required Please tell us which side in the CUSTOMER NOTES. The email system does not link to the order so please use the Customer Notes for special instructions.
We can eliminate the initials or reduce the number of loops to fit the Holsters.
===================================
PHOTOS:

Picture #1, 2, 3, 4 show the Russet Leather Color
(under different lighting conditions)
Picture #5 shows the Black Leather
Picture #6 shows the Dark Brown Leather
Picture #7 shows the Natural Oil Dipped leather
Picture #8 shows the RISER (a piece of leather sewn to the bottom of the belt to raise the shotgun shell)
===============================
CUSTOM WORK:

If you need the belt length to fit a smaller or larger size. Please ask for a Custom Quote to cut the leather down to size or add more leather. Typically not more than $10 extra.

See this Link for Custom Work. This will allow you to add the custom quote price to your order.
https://www.etsy.com/listing/531156167

====================================
DARK THREAD:
NO EXTRA CHARGE

Some customers prefer the Dark thread be used on the Dark Brown and Black leather. Please email us to request this option or put your request in the CUSTOMER NOTES when you order.

============================
PERSONALIZATION:

ADD THE 3 LETTERS (No Spaces) to the PERSONALIZATION form during check out.
It doesn’t cost anything and it looks good too.
You’ll want your initials on when you hand this one down to the next generation.

NO EXTRA CHARGE TO ADD 3 LETTERS:

The Letter punch that we use has 1", Western style letters. But we do have a 1/2" letter if we need it.

ALSO: Please enter your belt size . Explained below in the form of:
LDK38

When you order, if you want the initials and the size to be used, please use all 3 available letter characters and the size.

LDK 38
Letters plus the size range is 6 character spaces. Please confirm the size.

===================================
SPECIAL NOTE ON THE SIZE 30"-38" RANGE:

If we cut the leather back so that the 30" is the tightest hole, it will reduce the number of loops we can put on the belt.
For instance, the most 45-70 we could put on the 30" size would be about 23.
All 50 of the .22 LR would fit and all 40 of the 30-30.
==================================
MAX LOOPS:

PLEASE NOTE!
The max loops count is based on the standard length belt (38"- 50"). If you need to change the size of the belt to make it smaller, the number of loops will be reduced.

NEW EXCEPTION:
35 LOOPS IS MAX FOR THE 45-70 and we've adjusted the price for that amount.
That just means that the average size waist of 38" to 40" will only hold 35 Rounds of 45-70.
Please look for it when ordering.

Max Loops for 12ga is 24.
Max Loops for 28ga is 30.
Max and Standard Loops for 22 Rim Fire is 50. (Looks kinda bare otherwise.

MAX LOOPS FOR THE SMALLER CARTRIDGES is 40:
30-30, 32, 38, 357, 40, 45 LONG COLT, 45 REVOLVER, 308, 270, 223 ....

SUGGESTION:
When purchasing the .22 LR, we suggest ordering the 50 Loop selection to fill up the belt.

Also, if you are ordering the .22 LR 30 Loops, please tell us if you want space for holsters for competition. Right or Left side or both.

The additional cost for the SMALL CALIBERS in the Options list above
is just to cover more labor and stitching.

The cartridge holders are sewn into place with care given to the size of the cartridge so that they fit tight. Some force might be required to expand the loop for the first time.
===============================
ORDERING:

So, when ordering the Standard Belt size, you would choose the Standard from the Options above and then pick the size loops (caliber or gage) that you want from the other Options list.
There are 2 confusing options listed below on the 12 ga and 45-70.

When ordering the 12 ga the MAX we can fit on the Standard Belt is 24. See example below.
2PLY 12GA 24LOOP OIL

Then pick the loop size option of
12GA MAX 24 LOOPS (this needs to match the choice above or it will slow down your order)


When ordering the 45-70 the MAX we can fit on the Standard Belt is 35. See example below.
45-70MAX35LOOPS BLK (this is the price of the belt)

Then pick the loop size option of
45-70MAX35LOOPS (this needs to match the choice above or it will slow down your order)

When ordering the other more common sizes. Pick the color leather then 30 or 40 Loops. See example below.
2PLY 30LOOPS DK BRN
Then pick your caliber or gage in the Loop size option
45 LONG COLT
=================================
RETURNS:

Custom orders of this kind are not returnable.

(Size, color, 1 ply, 2 ply, width, caliber and initials would be tough to match)
Please make sure the choice is correct before you click the order button.
=================================
OTHER ITEMS IN OUR SHOP:

Please use this link to see other items that we make.
https://www.etsy.com/shop/AmishLeatherStore

====================================

Please NO RETURNS on these custom made items. We make them when you order them. Nothing on the shelf.

========================================
LINKS:

Black Cartridge Belt:
https://www.etsy.com/listing/543531473

Dark Brown Belt:
https://www.etsy.com/listing/914348347

Oil Dipped:
https://www.etsy.com/listing/544016637

Russet Color Cartridge Belt:
https://www.etsy.com/listing/529569030

Since we make these from scratch, we can make any cartridge size. Give us a call for special orders as we don't stock all the sizes.
740-358-9098

If you're looking for a nice, heavy Work belt please see the link below.
https://www.etsy.com/listing/205218093

Our belts feature NO scraps or pressed leather and no layering of plastic or synthetic sewn on to meet the requirement to be able to call it "real leather".
==========================================

Shipping:
Normally 1 belt will fit into a "flat rate" box from the USPS. Sometimes we can use the "REGIONAL RATE" for some items.
We will combine orders/items and credit the difference back to your account.

We estimate the time from order to shipping to be about 1-2 weeks.